VNCI 6154 Diagnostic Scanner for VW/Audi/Skoda/Seat Compatible with ODIS Software

VNCI 6154A VAG Diagnostic Tool is the alternative solution of original VAS 6154A, Works with original driver, Supports CAN FD and DoIP protocol, Works for all VAG Brands from 1995 to 2024, Compatible with ODIS driver V24.3.1 or above and ODIS Engineer V18.2 or above.

What Is VNCI 6154A?

VNCI 6154A is a high-performance diagnostic tool developed as a perfect alternative to the original VAS 6154A. Fully compatible with OEM ODIS software (Service and Engineer), VNCI 6154A supports the latest protocols including CAN FD and DoIP, making it suitable for all VAG vehicles from 1995 to 2024+. It works plug-and-play without requiring third-party software or drivers and supports online/offline programming and vehicle diagnostics across VW, Audi, Skoda, Seat, Bentley, Lamborghini, and MAN.

VNCI 6154A Highlights

• 100% compatible with original ODIS drivers, no modification needed
• Plug and play: no driver manager or patch required
• Free license valid until 2030
• Supports full protocols: KWP2000, UDS, CAN, K-Line, CAN FD, and DoIP
• Software compatibility:
  • ODIS Service: V5.2 to V24.3.1+
  • ODIS Engineer: V14.1 to V18.2
• Works on Win10/Win11 64-bit systems
• Three connection methods: USB / AP WiFi / WLAN
• 22 supported languages including English, German, Spanish, Russian, Japanese, etc.

Supported Vehicle Models

• VW, Audi, Skoda, Seat: 1995–2024+
• Bentley, Lamborghini, MAN: 1995–2024+

VNCI 6154A Key Features

• Online/Offline programming and coding
• Full vehicle diagnostics
• Flashing hidden features
• ECU software update and adaptation
• Real-time parameter viewing (digital and graphical)
• Read/clear DTCs, actuator tests, system resets
• Automatic vehicle scanning and full report export
• Enhanced measured value display and ECU communication

Connection Models

• USB – Direct connection via cable
• AP Mode (WiFi) – Connect via device WiFi (Password: 1-8)
• Station Mode (WLAN) – Add VNCI and PC to the same WLAN network

LED Indicators:

• Orange: Mode
• Green: Power
• Red: DoIP Communication
• Blue: Device connection
• Button: Switch between AP and WLAN modes

VNCI 6154A Functions

• Automatic recognition of the communication mode with the vehicle
• Reading and decoding fault codes
• Erasing errors
• Viewing current parameters in digital (up to 8) or graphic (up to 6) form
• Activation of actuators
• Adaptation of blocks and executive units
• Coding of electronic components
• Restoring basic settings mode
• Special test modes (cylinder balance, etc.)
• Ability to save and print received data
• Automatic scanning of all electronic components of the car with the output of a summary report
• Injection system diagnostics
• Fuel system diagnostics
• Performing service procedures
• Control unit software update
• Online function
• Flashing of hidden features
• Coding and programming
• Covering most of the models under Volkswagen Group’s automotive brands
• Support ODIS service v9.10/v10.0/v11.0+
• Support ODIS Engineer v14.1/v15.0/v16.0+
• 100% Support DoIP protocol
• 100% Support CAN FD protocol
• Support KWP2000/UDS/CAN/K-Line……etc protocol
• 100% support all protocols
• Vehicle diagnosis
• Online/Offline programming
• Flashing of hidden features
• Support all ODIS service and ODIS engineer function

What is the difference between the NEW 6154 DOIP Version and the normal 6154?

• DOIP 6154 can support DOIP diagnosis, especially it can do 2018 to 2024 new cars,
• DOIP 6154 supports more protocols (CAN FD and DoIP) than the old 6154.
• You don’t need any program or manager to run this VCI.
• The VCI loads the firmware very stable.
• It works with WLAN and also with USB.

VNCI 6154A Software Suite Includes

• ODIS Service 24.3.1
• ODIS Engineer 18.2
• ETKA 8.3 (Updated to 2023)
• ElsaWin 6.0 (Data to 2016)
• VCDS 24.7 (Requires HEX-V2 Cable)

System Requirements

• OS: Windows 10 64-bit (Professional Recommended)
• CPU: Intel i5/i7
• RAM: 4GB minimum
• HDD/SSD: 100GB free space or 256GB SSD recommended

VNCI 6154A Power Supply

• 12V via OBD port
• 5V via USB port

Why Choose VNCI 6154A?

• Fully replaces original VAS 6154A
• No license or patch required
• Enhanced diagnostic speed and protocol support
• Continuous operation for 8+ hours
• Reliable firmware stability and connection

Recommended Use

• Install original ODIS Service/Engineer software.
• Use official drivers only – avoid third-party patches or replacements.

Choose VNCI 6154A for reliable, professional-grade diagnostics and programming across all VAG group brands. Ideal for workshops, auto repair businesses, and enthusiasts who demand OEM-level functionality without the OEM price.

VNCI 6154A from VCCarTool is the optimal choice for technicians, workshops, and car enthusiasts who require a reliable and accurate diagnostic tool without the high cost of original equipment. Fully compatible with ODIS, supporting the latest protocols like CAN FD and DoIP, and requiring no license activation, it is the ideal VCI solution for all diagnostic and programming needs across Volkswagen Group vehicles.

You can find details about diagnostic equipment for VAG Group at: VAG Diagnostic Tool